Replacing the headlight bulb on a 2011-2019 Toyota Camry is an easy task that falls in the DIY category.
Both bulbs are located behind the headlight assembly and replaced the same way.
As always if in doubt take your vehicle to a professional.
Below are the steps with screenshots to replace them along with a video if needed for a visual walk through.
Tools and Parts Needed
- New Headlight Bulb
No tools are needed when replacing the headlight bulb.
Tools are only needed if there is corrosion on the vehicle.
2011-2019 Toyota Sienna H11 Headlight Bulb on Amazon
SYLVANIA – H11 XtraVision – High Performance Halogen Headlight Bulb, High Beam, Low Beam and Fog Replacement Bulb (Contains 2 Bulbs)
When replacing any headlight bulb be sure not to touch the bulb itself with your fingers, as oil from your hands can create a hot spot that shortens the life of the bulb.
How to Replace Headlight Bulb 2010–2018 Toyota Sienna
- Open the hood and locate the bulb behind the headlight assembly.
- Remove the electrical plug by pushing in the tab and pulling it out.
- Remove the bulb by turning it counter-clockwise.
- Insert the new bulb and turn it clockwise to lock it into place.
- Reattach the electrical plug.
- Test the light which should now work.
It is not difficult to replace the headlight bulb on a Toyota Camry but call a knowledgeable friend or professional if in doubt.
Climates age cars differently which can affect bolts being rusted or other possible problems.
A vehicle that was in an accident may also have some type of unforeseen problem.
Remember not to touch the bulb itself with your hands as it will cause a hot spot that burns the bulb out faster than usual.