Fix P2626 Error Code Replace 02 Sensor (2005-2009) Kia Spectra

By | March 10, 2022

Fix P2626 Error Code Replace 02 Sensor 2005 2009 Kia Spectra
If you have a (2005-2009) Kia Spectra that has a P2626 error code, the O2 sensor is likely bad.

Be sure to check the wiring and connections, which can also cause the same error.

Usually, the O2 sensor will need to be replaced.

Replacing the sensor is easy enough with the right tools.
Replace 02 Sensor 2005 2009 Kia Spectra
It is bolted in at the fount manifold and will be in tight.

This usually means using a breaker bar to break it loose.

O2 Sensor Location (2005-2009) Kia Spectra

The sensor is located at the front of the engine with a wire harness.
02 Sensor Kia Spectra Location
 
Items Needed

  • 02 Sensor
  • Breaker Bar
  • 22mm Deep Socket
  • 22mm Wrench

The sensor uses a 22mm to remove it with a deep socket best with a breaker bar.

An open-end wrench will be needed to tighten it back up without cutting the wire harness.

A new sensor is needed, which is available at an auto-parts store or on Amazon.

Also, an OBDII scan tool is a good thing to have to clear the engine light.

There are many low-cost budget OBDII scan tools that will work.

How To Replace 02 Upstream Sensor (2005-2009) Kia Spectra

  1. Remove the cover guard.
  2. Unplug the harness and cut the wires
  3. Using a 22mm deep socket and breaker bar, remove the sensor.
  4. Screw in the new sensor.
  5. Attach the wiring harness.
  6. Clear the engine light

Summary
Replacing the 02 sensors to clear a P2626 Error Code on a 2005-2009 Kia Spectra is a straightforward task.

The hardest part is breaking the old one loose and removing it.

The old one will be in there good, so it is best to use a breaker bar with a 22mm deep socket.

After it is replaced, sometimes the engine light will go off, but this is rare in my experience.

An OBDII scan tool is the best option, but there are some other budget options.

Some Kia owners disconnect the battery for 10-15 minutes and then hook it back up to clear the light.

I have never used this option but have heard of others having good luck with this method.

Another option is to take it to an auto-parts store that has free OBDII scans.

Category: General Automotive Repair

About Bob Thomas

Bob Thomas is an automotive mechanic with 30 plus years experience. He is a contributor to several publications and has written many articles on automotive maintenance and repairs. He also has created many auto repair videos on YouTube.

Leave a Reply

Your email address will not be published. Required fields are marked *

This site uses Akismet to reduce spam. Learn how your comment data is processed.