Review: Autel MaxiScan MS300 CAN Diagnostic Scan Tool for OBDII Vehicles

By | June 2, 2020

Review Autel MaxiScan MS300 CAN Diagnostic Scan Tool for OBDII Vehicles
The Autel MaxiScan MS300 is a low-cost diagnostic scan tool code reader for vehicles 1996 and newer.

Since it a low-cost OBDII scan tool this makes it ideal for those on a budget, just don’t expect all the extra features an expensive model would have.

Pros

  • It will display the error codes for almost any car 1996 or newer.
  • It will clear error codes.
  • Low-Cost.

Cons

  • It only shows the code and than it will need to be looked up online or in a book. There is no library built-in to show what the code might be.
  • No real time monitoring.
  • Low-cost scan tools almost never gets a software update so dont expect one.
  • No printing options.
  • Does not have built-in power and is powered by the OBDII connector.

How to Read Codes with the MaxiScan MS300

  1. Plug the cable into the vehicles OBD2 port under the dashboard.
  2. Review and setup Autel MaxiScan MS300 CAN Diagnostic Scan Tool for OBDII Vehicles
     

  3. Turn the vehicles key to the ON position.
  4.  

  5. Press the enter button on the unit and it will start to scan for codes.
  6. Review Autel MaxiScan MS300 CAN Diagnostic Scan Tool

  7. If there is a code it will give the code number otherwise it displays no codes.
  8. Review Autel MaxiScan MS300 CAN Diagnostic Scan Tool Low Cost Unit

  9. The MaxiScan MS300 has a simple menu to navigate the options including erasing a code if found.
  10. Review and Setup Autel MaxiScan MS300 CAN Diagnostic Scan Tool for OBDII Erase Error Codes

*This site contains affiliate paid links for which a commission earned.
Read More Reviews Here On Amazon
Autel MaxiScan MS300 OBD2 Scanner Professional Enhanced OBDII Diagnostic Code Reader Tool

Summary
The MaxiScan MS300 OBDII scan tool is built for the DIY type person looking to see what is wrong with their car on the cheap.

It is not built for a professional working environment but for occasional use.

There are not any added features and is a basic scan tool that will show error codes and clear them if necessary.

It is a good OBD2 scan tool as long as you know its limitations.

As always be sure to read the reviews on Amazon or elsewhere to be sure it is a good fit for you.

Bob Thomas
Latest posts by Bob Thomas (see all)

2 thoughts on “Review: Autel MaxiScan MS300 CAN Diagnostic Scan Tool for OBDII Vehicles

  1. Mike

    do you know if this will read and then be able to reset and ABS code??

    Reply

Leave a Reply

Your email address will not be published. Required fields are marked *

This site uses Akismet to reduce spam. Learn how your comment data is processed.