A video is at the bottom of the post for a visual walk-through if needed.
Replacing the headlight bulb on a 2014 GMC Sierra is an easy task that falls in the DIY category.
The driver side is much easier to replace compared to the passenger side which needs the air box removed.
As always if in doubt take your vehicle to a professional.
Below are the steps with screenshots to replace them along with a video if needed for a visual walk-through.
Tools and Parts Needed
- New 9012 Headlight Bulb
- Screw driver
No tools are needed when replacing the headlight bulb on the driver side.
A Screw driver is needed to remove the air box on the passenger side.
Headlight Bulb Type for 2014 GMC Sierra
- 9012 Headlight Bulb
The 2014 GMC Sierra uses a 9012 headlight bulb for both the low-beam and high-beam.
Replacement bulbs can be bought online or a local auto parts store.
Always verify your car year, make, and model when buying any car parts to be sure it matches.
Also, verify the old bulb when it is removed from the car with the new bulb.
9012 Headlight Bulb on Amazon
Philips 9012CVB2 CrystalVision ultra Upgrade Headlight Bulb (9012 HIR2)
When replacing any headlight bulb be sure not to touch the bulb itself with your fingers, as oil from your hands can create a hot spot that shortens the life of the bulb.
How to Replace Headlight Bulb 2014 GMC Sierra (Driver side)
- Open the hood and locate the bulb behind the headlight assembly.
- Remove the headlight bulb cover turning counter clockwise.
- Remove the electrical plug.
- Remove bulb turning counter clockwise.
- Insert new bulb turning clockwise.
- Reattach electrical plug.
- Reattach headlight bulb cover turning clockwise.
- Test the light which should now work.
How to Replace Headlight Bulb 2014-2018 GMC Sierra (Passenger side)
It is not difficult to replace the headlight bulb on a 2014 GMC Sierra but call a knowledgeable friend or professional if in doubt.
Climates age cars differently which can affect bolts being rusted or other possible problems.
A vehicle that was in an accident may also have some type of unforeseen problem.
Remember not to touch the bulb itself with your hands as it will cause a hot spot that burns the bulb out faster than usual.
Great instructions and made to be very easy
Hey, nice work. Very helpful. 👍