How To Replace a Fuel Pump Dodge 383 Engine

By | June 29, 2022

How To Replace a Fuel Pump Dodge 383 Engine
I recently needed to replace the fuel pump on a 1970 Dodge Monaco with a 383 engine.

The Dodge 383 was a popular engine in many vehicles, including the B-Body Mopar muscle cars Charger, Roadrunner, and Challenger.

Having replaced fuel pumps many times in the past, I ordered a new unit and started to install it.

A problem I had was the new one did not want to go into the opening.
How To Replace a Fuel Pump Dodge 383 Engine Pic 2
The old unit slid out easily, but the new fuel pump would not sit correctly.

I found out there was a push-rod that had slid down, stopping the new unit from going into place.

If the push-rod falls down it will need to be pushed back up into place.

If it does not stay up in place, grease can be used to help it stay while you insert the new fuel pump.

Another issue with the 383 I worked on was the location of the fuel pump was hard to get to.
How To Replace a Fuel Pump Dodge 383 Engine Location
The fuel pump on a Dodge 383 is located on the passenger side directly in front of the exhaust manifold.

I ended up removing the alternator to have more room to reach the 2 bolts and the push-rod easier.

Replacing the fuel pump can be done without removing the alternator but it makes the job much easier.

Things Needed To Replace a Fuel Pump on a Dodge 383 Engine

  • New Fuel Pump
  • 9/16 socket and wrench
  • 5/8 socket and wrench

There is two bolts holding the fuel pump in place along with two gas lines.

How To Replace a Fuel Pump on a Dodge 383 Engine

  1. Remove the gas lines going into and out of the fuel pump.
  2. Remove the 2 bolts holding the fuel pump.
  3. Look into the opening and be sure the push-rod is up.
  4. Insert the new fuel pump.
  5. Bolt it into place with the 2 bolts.
  6. Reattach the fuel lines.

Summary
Replacing the fuel pump on a Dodge 383 is easy enough, with two bolts and gas lines needing to be removed.

The location is the difficult part with the pump below the alternator.

If the engine is out of the vehicle, it will be easy to replace.

I removed the alternator, but it is not a requirement.

The push-rod may come down and need to be pushed back up into place.

Use some grease if the push-rod will not stay up to help it stick.

Have you had to replace a fuel pump on a Dodge 383 engine? Let us know your thoughts below.

Category: Dodge

About Bob Thomas

Bob Thomas is an automotive mechanic with 30 plus years experience. He is a contributor to several publications and has written many articles on automotive maintenance and repairs. He also has created many auto repair videos on YouTube.

Leave a Reply

Your email address will not be published. Required fields are marked *

This site uses Akismet to reduce spam. Learn how your comment data is processed.