Review: Car Code Reader, Launch CReader 4001 Diagnostic Scan Tool for Check Engine Light & Diagnostics

By | September 10, 2019

Review Car Code Reader, Launch CReader 4001 Diagnostic Scan Tool for Check Engine Light & Diagnostics
This unit was sent to me to review with my honest opinion and results below.

The Car Code Reader Launch CReader 4001 is an OBD2 automotive scan tool.

It comes with all the features needed to troubleshoot a car or truck engine light or diagnose vehicle problems.

It is also a low-cost unit making it good for the home DIY backyard mechanic.
Review Car Code Reader, Launch CReader 4001 Diagnostic Scan Tool Pic 2
OBDII ports are available to diagnose problems on cars or trucks built 1996 and newer.

OBDII is a set protocol that all manufactures follow to help fix a problem. Most all OBDII ports are under the driver side dashboard with a few manufactures having them located in other locations.

Scan tools like the CReader 4001 will talk to a vehicles on-board computer (ECM) and if there is an error give a code to the problem.

For example, here it shows a P0327 Code which is a Knock Sensor problem.
Review Car Code Reader, Launch CReader 4001 Diagnostic Scan Tool Pic 3
It could be a bad sensor or the wiring harness and connectors.

The main point of any OBDII scanner is to point to the problem usually displayed with a check engine light on or other problems such as not starting.

It also has many nice features Launch including OBD Partial Functions, Read DTCs, Clear DTCs, Read dynamic data streams, Read vehicle information and much more.
Review Car Code Reader, Launch CReader 4001 Diagnostic Scan Tool Pic 4
Another nice feature is no batteries are needed and it powers itself from the OBDII port.

*This site contains affiliate paid links for which a commission earned.
Read More Reviews Here on Amazon
Car Code Reader, Launch CReader 4001 Diagnostic Scan Tool for Check Engine Light & Diagnostics, Support Read and Clear Error Codes, Query DTCs and Support 1-10 Modes
 
Summary
The Launch CReader 4001 Diagnostic Scan Tool is a good unit for the money.

It does what it is meant to do which is scan for engine problems and point to the solution.

As with any troubleshooting some mechanical experience will be needed to fix a problem.

There are many forums and YouTube videos that can be very helpful in fixing car or truck mechanical issues.

If you need to know why an engine light is on or need a good scan tool for troubleshooting the Launch CReader 4001 is a good unit to get.

It will work with most any vehicle foreign or domestic built after 1996. It can also clear codes if needed turning off the engine light. Keep in mind they engine light will likely come back on until the problem with the car or truck is fixed.

One thought on “Review: Car Code Reader, Launch CReader 4001 Diagnostic Scan Tool for Check Engine Light & Diagnostics

  1. Reuben

    will this work on my Toyota Landcruiser 1999 VX100 4.7 Petrol? The only interface that could work up to date is the Toyota Techstream TIS and I want to find a handheld that can do my DTC’s?

    Reply

Leave a Reply

Your email address will not be published. Required fields are marked *

This site uses Akismet to reduce spam. Learn how your comment data is processed.